Skip to the content
iLink ProfessionalsLineSenseGUIDE
All topics (12 of 13)
  1. 1What LineSense does
  2. 2Where it works
  3. 3Before you start
  4. 4Where to put the cameras
  5. 5Set up the board
  6. 6Times, alerts and who is told
  7. 7Using the board every day
  8. 8A TV with no PC: HDMI
  9. 9Reports
  10. 10Where alerts and reports go
  11. 11How the times are measured
  12. 12When something looks wrong
  13. 13Setup checklist

LineSense › Guide › When something looks wrong

12When something looks wrong

What you seeWhy, and what to do
A register says Closed while a cashier is thereThe cashier stands outside its cashier zone, or the camera does not see that spot. Open the board's settings and draw the cashier zone where the cashier really stands (the pencil shows who is counted).
Fewer people in a line than you seeThe line is not drawn on the floor where people stand, or part of it is hidden behind a counter or a display. Check it with the pencil: every waiting person's dot must be green. Draw it again, or move the camera higher (section 4).
Waits look too longThe line zone reaches into an aisle where shoppers browse. Draw it only where the line forms.
Many walk-outs that did not happenThe line zone covers a walkway people cross. Make it tighter, or raise A walk-out under Times.
"A register's zone no longer exists"One of its zones was deleted in Insights. Open the board's settings and choose or draw it again.
No alerts arriveCheck, in order: Alert the manager is ticked and the alert kind is on; each person has E-mail or WhatsApp ticked with an address or number; the e-mail and WhatsApp tests in Notifications work; the Front counter board row's When is not holding it back (in Search the event says Not sent, with the reason).
Alerts every busy minuteRaise A long line must last, or the alert level of Waiting per open register, under Times.
A camera on the board says No pictureThe camera is offline or its stream changed: check it in Live View and Settings › Cameras / NVR.
The board is missing from the reportsIts In Reports box (Screen tab) is unticked.

Stuck on a step?

iLink Professionals supports owners and installers. Call, or send us a message.