Skip to the content
iLink ProfessionalsLineSenseGUIDE
All topics (11 of 13)
  1. 1What LineSense does
  2. 2Where it works
  3. 3Before you start
  4. 4Where to put the cameras
  5. 5Set up the board
  6. 6Times, alerts and who is told
  7. 7Using the board every day
  8. 8A TV with no PC: HDMI
  9. 9Reports
  10. 10Where alerts and reports go
  11. 11How the times are measured
  12. 12When something looks wrong
  13. 13Setup checklist

LineSense › Guide › How the times are measured

11How the times are measured

The gateway's AI finds each person in the cameras' pictures several times a second and follows them. The zones you drew turn that into times.

NumberHow
WaitFrom the moment a person steps into a register's line until they step into its spot at the register. The same person is followed all the way up the line to the register.
At the registerThe time in the spot at the register: paying, ordering. Shown and reported, never alerted.
Customers servedEveryone who reached a register from its line.
Walk-outSomeone in a line at least the walk-out time (20 seconds for a store) who leaves without reaching a register. Walking out through the lane after paying is not a walk-out, and neither is moving to another register's line: that customer keeps their wait and counts at the register they reach. Between two cameras the board links such a move just after a register opened (its cashier zone taken).
Register openSomeone is standing in its cashier zone. Without a cashier zone: it served someone in the last 10 minutes. A register's hours open in the reports are the time someone stood there.
In line per open registerEveryone waiting, not counting those being served, divided by the registers open (all of them, when every register is closed).
On goalThe share of customers served within the wait goal.
  • Where a person is is the bottom middle of their box: where they stand. That is why zones are drawn on the floor.
  • At night, in glare or when a camera shakes, the gateway's own scene handling makes it surer before it counts.
  • Times are the gateway's (its time zone, set in Settings › Date / Time), on the board, in the reports and in the alerts.
  • Privacy: only counts and times are kept for the board and its reports: no faces, no names. The video stays on the gateway and is kept as your cameras' video always is.

Stuck on a step?

iLink Professionals supports owners and installers. Call, or send us a message.