Skip to the content
iLink ProfessionalsDrive-Thru SOSGUIDE
All topics (12 of 13)
  1. 1What the board does
  2. 2Before you start
  3. 3Where to put the cameras
  4. 4Which lane type is mine?
  5. 5Set up the board
  6. 6Goals, the screen and alerts
  7. 7Using the board every day
  8. 8A TV with no PC: HDMI
  9. 9Reports
  10. 10Where alerts and reports go
  11. 11How the times are measured
  12. 12When something looks wrong
  13. 13Setup checklist

Drive-Thru SOS › Guide › When something looks wrong

12When something looks wrong

What you seeWhat to do
A car at a point is not on the boardOpen the point's zone (pencil). If the car's dot is grey, the zone is not where the car stands: redraw it on the ground, bigger, past the car's front and back.
Two cars at a point that serves oneThe zone reaches into the line behind it. Make it shorter, so it holds only the car being served.
A point's times are much too longThe zone also covers a place where cars wait before the point. Move the zone to where cars stop at the point itself.
Cars appear and disappear, or are "lost" between pointsA point is not seen well: a car hidden behind another car, a pillar, or the picture's edge. Check each zone on the live picture. If a camera cannot see a point properly, move or add a camera.
Drive-offs that did not happenThe line zone covers part of the parking lot or a bypass lane, where cars leave without having been in the line. Keep it on the drive-thru lane only.
"Camera offline" or "No picture" on the boardThe camera is not sending video. Check it in Live View and in Settings › Cameras / NVR.
Times are right but the hours are wrongThe gateway's time zone is wrong: Settings › Date / Time.
Car colours are grey at nightThe camera is in infrared (night) mode, which has no colour. Times are not affected.
The board says to set up the lane firstA point's zone was removed. Open Board settings and draw it again.
A camera is "Waiting: no capacity" in Settings › AnalyticsThe gateway's AI is full. Free a camera elsewhere or ask iLink about a larger gateway.
The kitchen TV is black, or shows the wrong thingSettings › Support › HDMI output: is the TV found on its port, with its signal On? Is On port the port the TV is plugged into? Capture shows what the TV shows.
The test e-mail failsRead the message under Send test email. With a courtesy relay, try the other one or your own mail account. With your own account, check the address and password (Gmail needs an app password).
No QR code on the WhatsApp tabThe gateway needs the internet: wait a few seconds after switching it on. If a message shows instead of the code, note it for iLink support.
WhatsApp alerts stoppedThe sending phone unlinked the gateway or is offline. A new QR code appears on the WhatsApp tab: scan it again. With Email me if the WhatsApp link drops on, the e-mail recipients are told.
Nothing arrives on the FTP server or in Google DriveTest connection on its tab; Recent uploads shows each upload's result. Google Drive needs a folder in a Shared Drive. Check that Alert Outputs ticks FTP or Google Drive for the Drive-thru board.
An alert did not come at night, or in the dayLook at its When in Alert Outputs (and the line's own Sends alerts in Analytics) and at the store hours. In Search the event says Not sent and why.
A scheduled report did not arriveReports › Scheduled reports shows when each was last sent; the Delivery tab shows whether the mail server or WhatsApp took it.
Changing the board laterMoving a zone with its pencil keeps everything measured so far. Changing goals works the past days out again with the new goals, so the reports always compare like with like. Choosing a different zone for a point starts that point's history again, so move a zone rather than replace it.

Stuck on a step?

iLink Professionals supports owners and installers. Call, or send us a message.